THE ULTIMATE IN PRODUCTIVITY
BULLSTERN RIPPER is normally applied in areas, where drilling and blasting with explosives is not permitted for safety and environmental reasons or simply more expensive. Also, suitable for demolition, mining, etc. It exceeds the hydraulic breaker production in 80% of job applications.
KEY BENEFITS
- 3 to 5 times higher productivity than hydraulic breakers
- Less disturbance of the surroundings (noise & dust)
- Bigger and heavier eccentric gears to maximize impact power
- Easy maintenance & better workability
VIBRO HAMMER W/F-Series
TIME-EFFICIENT WITH LESS LABOR
BULLSTER TILTING TYPE PILE DRIVER is the real time saver for pile driving jobs. With picking up a sheet pile in a horizontal position by 90-degree tilting function, the manual interference is reduced. In other words, almost nonstop piling operation is possible so that the operator is able to drive a sheet pile in a less cycle time than the basic type pile driver.
KEY BENEFITS
- High quality electrical harness
- 30% better efficiency than basic type
- Easy-clamping with no extra ground-level work
- Low-friction & long lasting cylinder
- 360-degree rotation / 90-degree tilting
VIBRO HAMMER S-Series
MOST VERSATILITY
BULLSTERN SIDE GRIP VIBRO HAMMER can handle, pitch and drive the sheet and tube piles. It is capable to accomplish the whole pile driving process without need of manual handling of the piles or assisting machinery – especially when limited space, head room or access is available.
KEY BENEFITS
- DESIGNED FOR MANY TYPES OF PILES & BEAMS
- 2 JAWS OPENING FOR MORE AGILITY
- ENHENCED CLAMPING FORCE BY ACCUMULATOR
- 360-DEGREE ROTATION / ±30-DEGREE TILTING
SHEARS C-Series
RUGGED DESIGN FOR STEEL
BULLSTERN SHEARS is used in scrap recycling yards and ensures a very high performances and an extraordinary level of efficiency and reliability. The cycle times are improved by the speed valve installed on all models.
KEY BENEFITS
- Less time waiting for jaw open or close to contact with speed v/v
- Cutting blades can be flipped in two ways, to use 4 different cutting edges
- Unique cutter array to maximize cutting force
- Armored cylinder to prevent damage
- 360-degree rotation
HYDRAULIC BREAKER B-Series
TIME-EFFICIENT WITH LESS LABOR
BULLSTER TILTING TYPE PILE DRIVER is normally applied in areas, where drilling and blasting with explosives is not permitted for safety and environmental reasons or simply more expensive. Also, suitable for demolition, mining, etc. It exceeds the hydraulic breaker production in 80% of job applications.
KEY BENEFITS
- Designed for all types of carriers, from 1 to 50 tons
- The mini-small range breakers are perfect for working in confined spaces such as inside buildings, along walls or in narrow trenches
- The medium-large range breakers are made for a variety of applications, combining efficiency with high performance
MULTI PROCESSOR MP-Series
Remarkable Combination
BULLSTERN MULTI PROCESSOR is a perfect tool for demolition applications, specifically for buildings made from steel beams because it is designed for not only crushing concrete but also removing and cutting rebars. Unlike other demolition tools, it can be used where
total control is needed in order to avoid noise and vibration.
KEY BENEFITS
- Increased versatility via interchangeable jaw sets
- Integrated speed valve for fast cycle time
- 360° hydraulic rotation in both directions
- Made of high strength, abrasion resistant steel
- Teeth are made of hardox steel
PULVERIZER P-Series
UNCOMPROMISED DURABILITY
BULLSTERN PULVERIZER is the ideal tools for demolition waste recycling, concrete crushing or the separation of rebars encountered within the concrete in the secondary reduction stage. All of the models are equipped with speed valve which allows faster cycle times. Also, one-piece changeable tooth system eliminates the downtime of welding and enables easy on-site maintenance.
KEY BENEFITS
- Available with or without rotation
- Integrated speed valve for fast cycle time
- 4 -way indexable blades provide 4 usable cutting edges
- One-piece changeable tooth plates
- Teeth are made of hardox steel
SORTING GRAB SG-Series
PRODUCTIVE MATERIAL HANDLING
BULLSTERN SORTING GRAB is made with abrasion-resistant steel and extremely effective for sorting and loading a variety of different materials as found in demolition debris, waste and recycling operations. Thanks to the interchangeable blades and the 360° rotation, it can handle large loads and odd shapes.
KEY BENEFITS
- Robust & reliable frame due to hardox
- 360-degree continuous rotation
- Synchronized jaws closing designed for severe duty applications
- Interchangeable blades
Are You Looking for Reliable Attachment Manufacturer?
We Make Attachments Compatible with Almost All Excavators.
The phantom crypto wallet is a secure and user-friendly solution for managing your Solana assets and NFTs, offering seamless transactions and easy access to decentralized apps.